Electrical Safety Testing
ISO 9001 certified
manufacturer
Global distribution
network
In-house repair &
calibration
Declarations of
conformity available
PRODUCT FINDER
Find the right analyser for your needs
Select your testing standard and region — we’ll recommend the best match.
ALL PRODUCTS
Electrical safety analysers
COMPARE
Side-by-side specification comparison
| Specification | Rigel 288+ | Rigel 62353+ | SafeTest 60+ | SafeTest 50 |
|---|---|---|---|---|
| IEC 62353 | ✓ | ✓ | — | — |
| IEC 60601-1 | ✓ | — | ✓ | — |
| NFPA-99 (USA) | — | — | — | ✓ |
| Earth leakage test | ✓ | ✓ | ✓ | ✓ |
| Patient leakage test | ✓ | ✓ | ✓ | ✓ |
| Protective earth resistance | ✓ | ✓ | ✓ | ✓ |
| PC software / data export | ✓ | ✓ | ✓ | ✓ |
| Barcode scanner compatible | ✓ | ✓ | ✓ | ✓ |
| Test n Tag printer support | ✓ | ✓ | ✓ | — |
HOW IT WORKS
The electrical safety testing process
1
Prepare the device under test (DUT)
2
Connect the analyser
3
Select and run the test sequence
4
Review pass / fail results
5
Export and label
STANDARDS EXPLAINED
Which standard applies to you?
IEC 62353
IEC 60601-1
NFPA-99 (USA)
SUPPORT & SERVICES
Which standard applies to you?
Repair & calibration
Register your product
Webinars & Guides
FAQ
Frequently asked questions
Testing verifies that medical electrical equipment is safe from electric shock hazards for patients and clinical staff. It measures earth bond continuity, insulation resistance, and leakage currents against the limits defined in the applicable standard.
IEC 62353 recommends testing after any repair and at regular scheduled intervals — typically every 12 months, though the interval may vary based on device risk class and local hospital policy.
Use IEC 62353 if you are performing routine in-service or post-repair checks on equipment already in use. Use IEC 60601-1 if you are a manufacturer or carrying out acceptance testing on new devices. The Rigel 288+ covers both.
Yes — all Rigel analysers are handheld and battery-powered, designed for use at the bedside or in any clinical environment without needing a fixed workbench setup.
Results are stored on the analyser and transferred to the Rigel PC software via USB. From there you can generate compliance reports, filter by asset, and export to PDF or CSV for audit purposes.